幸运红包app

Your current location : Home >> Products >> Steel and Electric Power
  • Armored hose assembly

    Armored hose series Armored hose mainly includes: (1) Armored air hose: At room temperature, it is used to transport high pressure compressed air or other inert gases. Armored steam hose is used to transport steam or superheated water below 150 ℃. It is suitable for use in situations where the working environment has poor changes and the requirements for safety are high. (2) Armored steam hose: It is used to transport steam or superheated water at a temperature below 150 ° C. It is suitable for use in situations where the working environment has poor changes and high safety requirements; (3) Armored oil transfer hose : For transporting gasoline, kerosene, diesel, engine oil and other mineral oils in the temperature range of -14 ℃ ~ + 40 ℃, it is suitable for high pressure, large changes in conditions, and high safety production requirements. (4) Armored dilute acid (alkali) hoses: for transporting dilute acid (alkali) solutions with a concentration below 40% (except nitric acid) at normal temperature. Suitable for high pressure, large changes in conditions, and high requirements for safe production. Optional. (5) Armored sandblasting hose: used for sandblasting or grouting by sandblasting machine after wind supply. Structure and joint form of armored hose The purpose of armoring: 1. To prevent the hose from being damaged by collision or mechanical friction. 2. Add heat insulation layer, which can be used in high temperature environment and improve service life. Structural form of armored hose: Type K: Add insulation material to the outer layer of the hose. K1 type: braided steel mesh sleeve on the outer layer of the hose. K2 type: add heat insulation material to the outer layer of the hose, and then weave the wire mesh cover. The joint form of armored hose: The joint form of armored hose is exactly the same as the joint and code of high-pressure hose assembly. Marking method of armored hose assembly: The marking method of armored hose assembly is to mark the structural form of armoring on the basis of the marking method of high-pressure hose assembly.

  • Armored hose assembly

    Armored hose series Armored hose mainly includes: (1) Armored air hose: At room temperature, it is used to transport high pressure compressed air or other inert gases. Armored steam hose is used to transport steam or superheated water below 150 ℃. It is suitable for use in situations where the working environment has poor changes and the requirements for safety are high. (2) Armored steam hose: It is used to transport steam or superheated water at a temperature below 150 ° C. It is suitable for use in situations where the working environment has poor changes and high safety requirements; (3) Armored oil transfer hose : For transporting gasoline, kerosene, diesel, engine oil and other mineral oils in the temperature range of -14 ℃ ~ + 40 ℃, it is suitable for high pressure, large changes in conditions, and high safety production requirements. (4) Armored dilute acid (alkali) hoses: for transporting dilute acid (alkali) solutions with a concentration below 40% (except nitric acid) at normal temperature. Suitable for high pressure, large changes in conditions, and high requirements for safe production. Optional. (5) Armored sandblasting hose: used for sandblasting or grouting by sandblasting machine after wind supply. Structure and joint form of armored hose The purpose of armoring: 1. To prevent the hose from being damaged by collision or mechanical friction. 2. Add heat insulation layer, which can be used in high temperature environment and improve service life. Structural form of armored hose: Type K: Add insulation material to the outer layer of the hose. K1 type: braided steel mesh sleeve on the outer layer of the hose. K2 type: add heat insulation material to the outer layer of the hose, and then weave the wire mesh cover. The joint form of armored hose: The joint form of armored hose is exactly the same as the joint and code of high-pressure hose assembly. Marking method of armored hose assembly: The marking method of armored hose assembly is to mark the structural form of armoring on the basis of the marking method of high-pressure hose assembly.

  • Armored hose assembly

    Armored hose series Armored hose mainly includes: (1) Armored air hose: At room temperature, it is used to transport high pressure compressed air or other inert gases. Armored steam hose is used to transport steam or superheated water below 150 ℃. It is suitable for use in situations where the working environment has poor changes and the requirements for safety are high. (2) Armored steam hose: It is used to transport steam or superheated water at a temperature below 150 ° C. It is suitable for use in situations where the working environment has poor changes and high safety requirements; (3) Armored oil transfer hose : For transporting gasoline, kerosene, diesel, engine oil and other mineral oils in the temperature range of -14 ℃ ~ + 40 ℃, it is suitable for high pressure, large changes in conditions, and high safety production requirements. (4) Armored dilute acid (alkali) hoses: for transporting dilute acid (alkali) solutions with a concentration below 40% (except nitric acid) at normal temperature. Suitable for high pressure, large changes in conditions, and high requirements for safe production. Optional. (5) Armored sandblasting hose: used for sandblasting or grouting by sandblasting machine after wind supply. Structure and joint form of armored hose The purpose of armoring: 1. To prevent the hose from being damaged by collision or mechanical friction. 2. Add heat insulation layer, which can be used in high temperature environment and improve service life. Structural form of armored hose: Type K: Add insulation material to the outer layer of the hose. K1 type: braided steel mesh sleeve on the outer layer of the hose. K2 type: add heat insulation material to the outer layer of the hose, and then weave the wire mesh cover. The joint form of armored hose: The joint form of armored hose is exactly the same as the joint and code of high-pressure hose assembly. Marking method of armored hose assembly: The marking method of armored hose assembly is to mark the structural form of armoring on the basis of the marking method of high-pressure hose assembly.

  • Armored hose assembly

    Armored hose series Armored hose mainly includes: (1) Armored air hose: At room temperature, it is used to transport high pressure compressed air or other inert gases. Armored steam hose is used to transport steam or superheated water below 150 ℃. It is suitable for use in situations where the working environment has poor changes and the requirements for safety are high. (2) Armored steam hose: It is used to transport steam or superheated water at a temperature below 150 ° C. It is suitable for use in situations where the working environment has poor changes and high safety requirements; (3) Armored oil transfer hose : For transporting gasoline, kerosene, diesel, engine oil and other mineral oils in the temperature range of -14 ℃ ~ + 40 ℃, it is suitable for high pressure, large changes in conditions, and high safety production requirements. (4) Armored dilute acid (alkali) hoses: for transporting dilute acid (alkali) solutions with a concentration below 40% (except nitric acid) at normal temperature. Suitable for high pressure, large changes in conditions, and high requirements for safe production. Optional. (5) Armored sandblasting hose: used for sandblasting or grouting by sandblasting machine after wind supply. Structure and joint form of armored hose The purpose of armoring: 1. To prevent the hose from being damaged by collision or mechanical friction. 2. Add heat insulation layer, which can be used in high temperature environment and improve service life. Structural form of armored hose: Type K: Add insulation material to the outer layer of the hose. K1 type: braided steel mesh sleeve on the outer layer of the hose. K2 type: add heat insulation material to the outer layer of the hose, and then weave the wire mesh cover. The joint form of armored hose: The joint form of armored hose is exactly the same as the joint and code of high-pressure hose assembly. Marking method of armored hose assembly: The marking method of armored hose assembly is to mark the structural form of armoring on the basis of the marking method of high-pressure hose assembly.

  • Armored hose assembly

    Armored hose series Armored hose mainly includes: (1) Armored air hose: At room temperature, it is used to transport high pressure compressed air or other inert gases. Armored steam hose is used to transport steam or superheated water below 150 ℃. It is suitable for use in situations where the working environment has poor changes and the requirements for safety are high. (2) Armored steam hose: It is used to transport steam or superheated water at a temperature below 150 ° C. It is suitable for use in situations where the working environment has poor changes and high safety requirements; (3) Armored oil transfer hose : For transporting gasoline, kerosene, diesel, engine oil and other mineral oils in the temperature range of -14 ℃ ~ + 40 ℃, it is suitable for high pressure, large changes in conditions, and high safety production requirements. (4) Armored dilute acid (alkali) hoses: for transporting dilute acid (alkali) solutions with a concentration below 40% (except nitric acid) at normal temperature. Suitable for high pressure, large changes in conditions, and high requirements for safe production. Optional. (5) Armored sandblasting hose: used for sandblasting or grouting by sandblasting machine after wind supply. Structure and joint form of armored hose The purpose of armoring: 1. To prevent the hose from being damaged by collision or mechanical friction. 2. Add heat insulation layer, which can be used in high temperature environment and improve service life. Structural form of armored hose: Type K: Add insulation material to the outer layer of the hose. K1 type: braided steel mesh sleeve on the outer layer of the hose. K2 type: add heat insulation material to the outer layer of the hose, and then weave the wire mesh cover. The joint form of armored hose: The joint form of armored hose is exactly the same as the joint and code of high-pressure hose assembly. Marking method of armored hose assembly: The marking method of armored hose assembly is to mark the structural form of armoring on the basis of the marking method of high-pressure hose assembly.

  • Compensator element

2/10 pages Total 56 First Previous Next Last Go page