Material and structure of the product: Inner rubber layer, fabric reinforcement layer and outer rubber layer, wrapped ceramic fiber or asbestos fiber cloth. Can choose natural rubber, styrene-butadiene rubber, butadiene rubber, EPDM, etc. according to the different requirements of customers
Product advantages and characteristics: The water-cooled cable hose produced by our company uses the most aging-resistant, excellent insulation compounded vulcanized water-cooled cable sleeve body. It has high temperature resistance, electrical radiation heat resistance, and electrical breakdown resistance up to 30,000 volts. 、 Good insulation performance, good flexibility, small bending radius, long-term periodic reciprocating motion will not cause fatigue aging, suitable for steelmaking at operating temperature of -20 ℃ ～ + 80 ℃ or not more than 180 ℃ intermittent ambient temperature Furnace hose with large cross section flexible water-cooled cable.
IF water-cooled cable hose supply that can guarantee the use period | IF frequency water-cooled cable hose supply for IF furnace
Product application scope and use: used for cable sheath, internal water cooling, temperature reduction, etc. The applicable cables are monocrystalline silicon furnace water-cooled cable, polysilicon furnace water-cooled cable, industrial silicon furnace water-cooled cable, intermediate frequency furnace water-cooled cable, high frequency Power supply water-cooled cable, high-frequency welder water-cooled cable, electric arc furnace water-cooled cable, mineral heat furnace water-cooled cable, vacuum furnace water-cooled cable, resistance furnace water-cooled cable, electroslag furnace water-cooled cable, spot welder water-cooled cable
Product production and inspection standards:
Determination of tensile properties of GB528 vulcanized rubber
GB3512 rubber hot air aging test method
GB5562 Physical test method for rubber coating
GB5563 hose hydraulic test method
GB9573 Rubber, plastic hoses and hose assemblies, dimensions measuring methods
GB9576 Guide for the selection, storage, use and maintenance of rubber, plastic hoses and hose assemblies
GB9577 Mark of rubber, plastic hose and hose assembly, insulation material HB2185 Rubber hose appearance quality packing and transportation rules
IF water-cooled cable hose supply that can guarantee the life span | Intermediate frequency water-cooled cable hoses for IF furnaces are supplied with a flared locking nut type, connected to the induction coil in the vacuum furnace, and the other end electrode structure is a flat flange type, which is connected to the capacitor The outer sheath of the cable has a tapered sealing ring to ensure that it is sealed to the outer shell of the vacuum furnace. In the water-cooled cable part of the vacuum furnace, the outer sheath is protected against high temperatures. The cooling water of the water-cooled cable directly enters the induction coil in the vacuum furnace and circulates. Cooling, widely used in NdFeB magnetic vacuum sintering furnace, can replace imported cables. 8. Polycrystalline furnace water-cooled cable: Water-cooled cable electrode and synthetic rubber tube with polysilicon purification furnace induction coil mechanical stress. Soft conductor: layered braided or stranded with enameled wire with a diameter of 0.51mm. Core tube: Due to the large nominal cross-sectional area of the water-cooled cable, it supports and locates the flexible conductor and bears the tensile force of the water-cooled cable connection part and flexible tubular products or other structures. Differential spring: a non-magnetic stainless steel piece used to connect the core tube and the end joint to gently and reduce the bending stress on the water-cooled cable during operation. Clamps: clips made of non-magnetic stainless steel for fixing the outer tube and / or protective ring, with locking device, and medium frequency water-cooled cable hose supply that can guarantee the life span | intermediate frequency water-cooled cable hose supply for IF furnaces
Product description of water-cooled cable jacket hose:
Water-cooled cable jacket hose has high temperature resistance, electric radiation heat resistance, insulation breakdown resistance up to 30,000 volts, carbon-free jacket, good insulation performance, good flexibility, and small bending radius.
Product advantages of water-cooled cable jacketed hose:
Water-cooled cable jacket hose has high temperature resistance, electrical radiation heat resistance, electrical breakdown resistance up to 30,000 volts, carbon-free jacket, good insulation performance, good flexibility, and small bending radius.
Third, the water-cooled cable jacket hose products are suitable for:
Water-cooled cable jacket rubber hose is suitable for large-section flexible water-cooled cable jacket rubber hoses for steelmaking furnaces that are used at an operating temperature of -20 ℃ ～ + 80 ℃ or not more than 150 ℃. It has high temperature resistance, electrical radiation heat resistance, electrical breakdown resistance up to 30,000 volts, carbon-free jacket tube, good insulation performance, good flexibility, and small bending radius of insulating materials.
Fourth, water-cooled cable jacket rubber tube structure size and tolerance:
The hose consists of an inner rubber layer, a fabric reinforcement layer and an outer rubber layer.
2.Dimensions and tolerances
3. The inner diameter and tolerance of the hose shall comply with the requirements in Table 1.
4. The length of the hose is proposed by the user and agreed between the supplier and the buyer. The tolerance of the length of the insulation material shall not be greater than ± 1.5% of the length of the hose.
Asbestos rubber pipe is composed of high-density asbestos cloth, rubber outer rubber, natural or synthetic fiber reinforced layer and rubber inner rubber. It is suitable for the transportation of cooling water in high temperature areas such as steel and iron alloy electric furnace smelting